ASTM Seamless Carbon Steel Tube/Pipe Driveline Tubing
DOM Driveline Tubing / Shafting is a Drawn over Mandrel 1020/1026 carbon steel used for replacement and manufacturing of driveline shafts. The tube's tight tolerances, straightness, and high strength make it a superior product to many of the welded products in the market.
-
Meets ASTM A 513 Type 5
-
Stocked Size range 1.250" -5.118" OD; 0.065" - 0.250" wall thickness
-
Stocked in 20' random lengths
-
Cut to length sizes
-
Stocked in imperial and metric sizes
-
We carry replacement Heavy Duty Driveline Shafting
Benefits of DOM Driveline Tubing:
D.O.M. Steel Tubing
ASTM A513 Type 5
Grade |
Chemistry |
% |
Yield |
Tensile |
Elongation |
Typical Hardness |
|
|
|
PSI |
PSI |
% in 2" section |
Min |
1020 |
Carbon |
0.15-0.25 |
60,000 |
70,000 |
10 |
B-80 |
|
MN |
0.30-0.60 |
|
|
|
|
|
P |
0.040 Max |
|
|
|
|
|
S |
0.050 Max |
|
|
|
|
1026 |
Carbon |
0.21-0.28 |
75,000 |
85,000 |
15 |
B-85 |
|
MN |
0.60-0.90 |
|
|
|
|
|
P |
0.040 Max |
|
|
|
|
|
S |
0.050 Max |
|
|
|
|
ST52.3 |
Carbon |
0.13-0.18 |
75,000 |
85,000 |
15 |
B-80 |
|
MN |
.012-.014 |
|
|
|
|
|
P |
0.025 max |
|
|
|
|
|
S |
0.010 max |
|
|
|
|
Diameter Tolerances
OD Inches |
Wall: |
OD Inches |
ID Inches |
Size Range |
Percent of OD |
Plus |
Minus |
Plus |
Minus |
Up to 0.499 |
All |
0.004 |
0.000 |
|
|
0.500-1.699 |
All |
0.005 |
0.000 |
0.000 |
0.005 |
1.700-2.099 |
All |
0.006 |
0.000 |
0.000 |
0.006 |
2.100-2.499 |
All |
0.007 |
0.000 |
0.000 |
0.007 |
2.500-2.899 |
All |
0.008 |
0.000 |
0.000 |
0.008 |
2.900-3.299 |
All |
0.009 |
0.000 |
0.000 |
0.009 |
3.300-3.699 |
All |
0.001 |
0.000 |
0.000 |
0.001 |
3.700-4.099 |
All |
0.011 |
0.000 |
0.000 |
0.011 |
4.100-4.499 |
All |
0.012 |
0.000 |
0.000 |
0.012 |
4.500-4.899 |
All |
0.013 |
0.000 |
0.000 |
0.013 |
4.900-5.299 |
All |
0.014 |
0.000 |
0.000 |
0.014 |
5.300-5.549 |
All |
0.015 |
0.000 |
0.000 |
0.015 |
5.550-5.999 |
Under 6" |
0.001 |
0.001 |
0.001 |
0.001 |
|
6 to 7 1/2" |
0.009 |
0.009 |
0.009 |
0.009 |
6.000-6.499 |
Under 6 |
0.013 |
0.013 |
0.013 |
0.013 |
|
6 to 7 1/2" |
0.001 |
0.001 |
0.001 |
0.001 |
6.500-6.999 |
Under 6 |
0.015 |
0.015 |
0.015 |
0.015 |
|
6 to 7 1/2 |
0.012 |
0.012 |
0.012 |
0.012 |
7.000-7.499 |
Under 6 |
0.018 |
0.018 |
0.018 |
0.018 |
|
6 to 7 1/2 |
0.013 |
0.013 |
0.013 |
0.013 |
7.500-7.999 |
Under 6 |
0.002 |
0.002 |
0.002 |
0.002 |
|
6 to 7 1/2 |
0.015 |
0.015 |
0.015 |
0.015 |
8.000-8.499 |
Under 6 |
0.023 |
0.023 |
0.023 |
0.023 |
|
6 to 7 1/2 |
0.016 |
0.016 |
0.016 |
0.016 |
8.500-8.999 |
Under 6 |
0.025 |
0.025 |
0.025 |
0.025 |
|
6 to 7 1/2 |
0.017 |
0.017 |
0.017 |
0.017 |
9.000-9.499 |
Under 6 |
0.028 |
0.028 |
0.028 |
0.028 |
|
6 to 7 1/2 |
0.019 |
0.019 |
0.019 |
0.019 |
9.500-9.999 |
Under 6 |
0.003 |
0.003 |
0.003 |
0.003 |
|
6 to 7 1/2 |
0.002 |
0.002 |
0.002 |
0.002 |
10.000-10.999 |
Under 6 |
0.034 |
0.034 |
0.034 |
0.034 |
|
6 to 7 1/2 |
0.022 |
0.022 |
0.022 |
0.022 |
11.000-11.999 |
Under 6 |
0.035 |
0.035 |
0.035 |
0.035 |
|
6 to 7 1/2 |
0.025 |
0.025 |
0.025 |
0.025 |
12.000-12.999 |
Under 6 |
0.036 |
0.036 |
0.036 |
0.036 |
|
6 to 7 1/2 |
0.027 |
0.027 |
0.027 |
0.027 |
13.000-13.999 |
Under 6 |
0.037 |
0.037 |
0.037 |
0.037 |
|
6 to 7 1/2 |
0.029 |
0.029 |
0.029 |
0.029 |
14.000-15.000 |
Under 6 |
0.038 |
0.038 |
0.038 |
0.038 |
|
6 to 7 1/2 |
0.003 |
0.003 |
0.003 |
0.003 |
Ovality shall be within the above tolerances except when the wall thickness is less than 3% of the OD.
In those cases the additional ovality shall be as follows, but the mean diameter shall be within the specified tolerance
Outside Diameter |
Additional Ovality Tolerance |
Outside Diameter |
Additional Ovality Tolerance |
Up to 2" |
0.010" |
7" - 8" incl. |
0.040" |
2" - 3" incl. |
0.015" |
8" - 9" incl. |
0.045" |
3" - 4" Incl. |
0.020" |
9"-10" incl. |
0.050" |
4" - 5" incl. |
0.025" |
10"-11" incl. |
0.055" |
5" - 6" incl. |
0.030" |
11"-12" incl. |
0.060" |
6" - 7" incl. |
0.035" |
12"-12.5"incl. |
0.065" |
Straightness Tolerance
.030" in any 3 ft. of length up to 7.500" OD |
.060" in any 3 ft. of length over 7.500" OD |
Wall Tolerances
Wall |
Including |
Over .875 to |
Over 1.875 to |
Over 3.750 to |
Thickness, |
.375 to |
1.875 OD |
3.750 OD |
15.000 OD |
Inches |
.875 OD |
|
|
|
0.028 & 0.035 |
0.002 |
0.002 |
0.002 |
|
|
-0.002 |
-0.002 |
-0.002 |
|
0.049 |
0.002 |
0.002 |
0.002 |
|
|
-0.002 |
-0.003 |
-0.003 |
|
0.065 |
0.002 |
0.002 |
0.002 |
0.004 |
|
-0.002 |
-0.003 |
-0.003 |
-0.004 |
0.083 |
0.002 |
0.002 |
0.003 |
0.004 |
|
-0.002 |
-0.003 |
-0.003 |
-0.005 |
0.095 |
0.002 |
0.002 |
0.003 |
0.004 |
|
-0.002 |
-0.003 |
-0.003 |
-0.005 |
0.109 |
0.002 |
0.002 |
0.003 |
0.005 |
|
-0.003 |
-0.004 |
-0.003 |
-0.005 |
0.120 |
0.003 |
0.002 |
0.003 |
0.005 |
|
-0.003 |
-0.004 |
-0.003 |
-0.005 |
0.134 |
|
0.002 |
0.003 |
0.005 |
|
|
-0.004 |
-0.003 |
-0.005 |
0.148 |
|
0.002 |
0.003 |
0.005 |
|
|
-0.004 |
-0.003 |
-0.005 |
0.165 |
|
0.003 |
0.003 |
0.005 |
|
|
-0.004 |
-0.004 |
-0.006 |
0.180 |
|
0.004 |
0.003 |
0.006 |
|
|
-0.004 |
-0.005 |
-0.006 |
0.203 |
|
0.004 |
0.004 |
0.006 |
|
|
-0.005 |
-0.005 |
-0.007 |
0.220 |
|
0.004 |
0.004 |
0.007 |
|
|
-0.006 |
-0.006 |
-0.007 |
0.238 |
|
0.005 |
0.005 |
0.007 |
|
|
-0.006 |
-0.006 |
-0.007 |
0.259 |
|
0.005 |
0.005 |
0.007 |
|
|
-0.006 |
-0.006 |
-0.007 |
0.284 |
|
0.005 |
0.005 |
0.007 |
|
|
-0.006 |
-0.006 |
-0.007 |
0.300 |
|
0.006 |
0.006 |
0.008 |
|
|
-0.006 |
-0.006 |
-0.008 |
0.320 |
|
0.007 |
0.007 |
0.008 |
|
|
-0.007 |
-0.007 |
-0.008 |
0.344 |
|
0.008 |
0.008 |
0.009 |
|
|
-0.008 |
-0.008 |
-0.009 |
0.375 |
|
|
0.009 |
0.009 |
|
|
|
-0.009 |
-0.009 |
0.400 |
|
|
0.01 |
0.01 |
|
|
|
-0.01 |
-0.01 |
0.438 |
|
|
0.011 |
0.011 |
|
|
|
-0.011 |
-0.011 |
0.480 |
|
|
0.012 |
0.012 |
|
|
|
-0.012 |
-0.012 |
0.531 |
|
|
0.013 |
0.013 |
|
|
|
-0.013 |
-0.013 |
0.563 |
|
|
0.013 |
0.013 |
|
|
|
-0.013 |
-0.013 |
0.580 |
|
|
0.014 |
0.014 |
|
|
|
-0.014 |
-0.014 |
0.600 |
|
|
0.015 |
0.015 |
|
|
|
-0.015 |
-0.015 |
0.625 |
|
|
0.016 |
0.016 |
|
|
|
-0.016 |
-0.016 |
0.650 |
|
|
|
0.017 |
|
|
|
|
-0.017 |